Mineral wagon, Model 19-953
 order now
The car is designed to carry bulk cereals and light mineral fertilizers of granulated coarse-grained crystalline non-corrosive mineral fertilizers such as carbamide, ammonia sulphate, etc., with specific gravity 0,77-0,8 g/cm3, as well as bulk powdered
raw materials (mainly apatite concentrate ) for fertilizer production.
Open - top cars permit to transport coal , break-stone, expanded clay aggregate, sand and other bulk materials.
Manufactured according to climatic conditions in version Y as per GOST 15150.
On customer’s request cars with internal corrosion –resistant coat as well as the top- open cars can be delivered.
The car is loaded mechanically through four slotted center-line hatches ensuring the blanket charging without changing position.
The lower part of the car body has four dump doors arranged in pairs on the car opposite sides. The clear opening of each door is 2382 x 825 mm.
The pneumatically-operated unloading mechanism ensures the opening and closing of the hatch covers either in
pairs or simultaneously of all the four covers.
An interlocking device prevents the hatch covers from spontaneous opening when the car is either in transit or parked.
| Specifications |
|
| Carrying capacity, t |
70 |
| Mass (tare), t |
24 |
| Load of wheel pair on rails, kN (tf) |
230.0 (23.5) |
| Body volume, m3 |
89 |
| Length over automatic coupler centres, mm |
13 200 |
| Base, mm |
8 980 |
| Maximum width, mm |
3 275 |
| Inclination angle of end walls of body, degree |
55 |
| Inclination angle of end walls of hopper, degree |
65 |
| Height above rail head level, mm |
5120 |
| Number of unloading hatches, pieces |
4 |
| Number of loading hatches, pieces, |
4 |
| Distance between loading hatches, mm |
1 831 |
| Dimensions of loading hatches, mm |
1 599 x 596 |
| Dimensions of unloading hatches, mm |
2 000 x 530 |
| Minimum radius of rounded curve, m |
80 |
| Kind of discharge |
2-sided |
| Discharge system |
Pneumatic/manual |
| Two-axle bogie |
Model 18-100 |
Design speed, km/h:
In loaded condition
In empty condition |
120
120 |
| Track gauge, mm |
1 520 |
| Clearance limit to GOST 9238-83 |
1-T |
Differences between car Model 19-953-01and its analogue 19-923:
- Side and end walls are 100 mm higher
- The top is 1074 mm longer, and 80 mm higher
- The body space is enlarged from 81 m3 up to 89 m3 without increasing the car’s carrying capacity , which allows to use it for transportation of light-weight mineral fertilizers with specific weight 0,77-0,8 g/ sm3
- There inclination of the body end walls is decreased from 65 up to 55°.
- The above design modifications of the car allow to use it more effectively for transportation of mineral fertilizers with low specific gravity and to increase its braking efficiency .
order now
Other models:
|
